How to resolve issues with MangoPi MQ-QUAD running Debian and usb-c hubs

Last Updated on April 9, 2023 by pg@petergamma.org

Here is shown that there are issues with the MangoPi MQ-QUAD running Debian and usb-c hubs:

https://forum.armbian.com/topic/23201-cnx-software-mangopi-mq-quad-sbc-%E2%80%93-allwinner-h616-meets-raspberry-pi-zero-w-form-factor/

I had problems with a Raspberry Pi zero 2 w and usb-c hubs connected over usb2 adapters.

  1. First I tried to connect the first usb-c hub, but neither keyboard nor mouse worked.
  2. I tried the second hub, it was the same model but another device. It did not work either.
  3. Then I tried the third usb-c hub. It worked, I could plug in an usb2 keyboard which worked with the Raspberry Pi zero w2. The usb-c hub was this product type:

https://de.aliexpress.com/item/1005003033528048.html?spm=a2g0o.productlist.main.39.31fb40f5iVx4bi&algo_pvid=f8acf332-f4a8-4a89-8072-311911b7c96c&aem_p4p_detail=20230409081414603151522051740009033250&algo_exp_id=f8acf332-f4a8-4a89-8072-311911b7c96c-19&pdp_npi=3%40dis%21USD%2111.07%217.75%21%21%21%21%21%40212243c016810532540357131d06cc%2112000023715312835%21sea%21CH%21777421489&curPageLogUid=FYRRCIQs22X2&ad_pvid=20230409081414603151522051740009033250_20&ad_pvid=20230409081414603151522051740009033250_20

usb-c hubs are not always recognized, I had in the past similar problems with other hubs.

For instance on my PinePhone, I tried 3 different usb-c hubs. None of them worked. A user in the Pine64 forum reported to have tested 12 different usb-c hubs with the PinePhone pro, most of them worked:

https://forum.pine64.org/showthread.php?tid=18059

The most important thing with usb-c hubs is to have experience with these devices and share our experience with others.